The points can't ingore during the water jet cutting machine working

Water jet cutting is a form of cold cutting that is widely used in non-metal and metal processing fields, and has obvious advantages over traditional processing technologies. Today, Nanjing tuobo cnc machine tool co., ltd will introduce the key points of the water cutting processing can't ignore during cutting .

1. During the process of cutting the workpiece, the operator and the unrelated person should keep a certain distance from the equipment.

2, when cutting small and light workpieces, should take fixed measures to prevent cutting in the process.

3. It is necessary to ensure that the workpiece to be cut has been placed flat to avoid damage to the cutting sand tube and cause a safety accident.

4. If it is found that the workpiece is impacted during the cutting process, it is forbidden to use other objects to correct.

5. In the process of reclaiming and changing nozzles, the high-pressure water switch must be turned off first, or the high-pressure water is turned off, and the residual high-pressure water is removed and operated.

6. When using waterjet cutting, it should be operated according to different materials and different pressures.

7. In the process of using waterjet machining, pay attention to the working seal of the waterjet supercharger and high pressure pipe.

8. In the event of an emergency power outage, the high-pressure water will remain in the high-pressure system. Once the incoming call, the residual high-pressure water will be ejected. Therefore, do not approach the cutting head at this time. After re-connecting the power, the residual high-pressure water should be discharged. except.

9. The operator should always observe the display of the running status indicator of the equipment.

10. Pay attention to the collision equipment during the process of lifting the workpiece by driving.

11. The edge of the workpiece processed by the waterjet is very sharp, so it should be highly noticed to be scratched and cut.